Skip to content
5 Best 3D Printer for Iron Man Armor in 2021 - Reviews

5 Best 3D Printer for Iron Man Armor in 2021 - Reviews

Since the introduction of 3D printers in several professional fields and the toy industry, Marvel fans have been looking forward to a time when they can also have 3D printed iron man armor. Today, there are serval 3D printers that can do that.
This means if you’re a marvel fan, you necessarily don’t have to spend some extra cash to get a superhero suit; you can make one for yourself. All you need is to get a suitable 3D printer plus your creativity, and you’re there already.
However, with the vast options of 3D printer available in the market, choosing the best may be challenging. Here, you’ll learn about the best 3D printer for Iron Man Armor. Thus, your selection process has been made easier.
The following are the best 3D printer for Iron Man Armor:

5 Best 3D Printer for Iron Man Armor in 2021

1. Creality CR10S4

Creality CR10S4

Check Prices on Amazon

If you have $899, then you can get yourself a Creality CR10S4 3D printer. It offers a large printing size of 15.8”x15.8”x15.8” or 400*400*400mm. This beautiful printer is easy to assemble. When you purchase one for yourself, you would have spent on a printer that is already half-assembled. All you need is extra 10 minutes to complete the assembling. If you’re looking for a 3D printer that can solve the problem of high freight, then this is what you should go for.
Creality CR10S4 has a filament monitor; thus, you’ll be notified by the printer once the filament is exhausted. The printing process will also stop once the machine is out of filament. Once the machine is reloaded with filaments, the printing will automatically resume. This process will help secure your printing precision and ensure that you have excellent iron man armor 3D printing.
This model is one of the best for anyone who needs a much more stable printing. It owes this to its dual z rod screws and motors. They provide the printer with the required stability it needs to perform at its best. Creality CR10S4 weighs 44.9 pounds, has a printing accuracy of 0.1mm, and nozzle diameter standard 0.4mm. The nozzle diameter can be regulated to 0.3/0.2mm.
Another fantastic feature of this superb printer for iron man armor is its printing speed. It operates at an average speed of 80mm/s and a maximum speed of 200mm/s. The maximum speed of this printer is, therefore, more than many other 3D printers. Its body structure is made of imported v-slot aluminum bearings, and it supports Linux, Windows, and OSX operating systems.
Creality CR10S4 supports STL, JPG, OBJ, and G-Code printing format. It is specifically made for people looking for a printer with software supporting PROE, Solid-works, 3D max, UG, and Rhino 3D design software.

What I Like About This Model

  • Resume prints after a power outage
  • High printing precision
  • Stable during operation
  • Coupling of this model is easier
  • Notifies the user when filament runs out.

What I Don’t Like About This Model 

  • It is expensive 

Check Prices on Amazon


2. Creality Ender 3

Creality Ender 3

Check Prices on Amazon

Creality Ender 3 is an affordable printer for Iron man armor. You can get this model for $209.00. Perhaps you want to know what is unique about this product. Now, let’s venture into that. Creality Ender 3 has incredible features that allow you to make larger prints. When you work with this printer, you don’t have to be worried about power outage, which can damage the print work you’ve been doing for hours. It has a modern control board that reminds the printer where it stopped printing before the power outage. Hence, once power is restored, your iron man armor 3D printing automatically continues from where it stopped without affecting your print precision.
Using a printer of this nature is not a challenging task that requires a lot of technicalities. All you need to do is get the file across to your printer by uploading it through your microSD card. Once you’ve done that, your next line of action will be to ensure that the hot bed and hot end, otherwise known as building surface and nozzle, respectively, are leveled. Then, press the print button. Once you do that, the printer will read the code and begin to print immediately.
Ender 3 comes with an advanced MK-8 extruder, which reduces the challenges posed by clogging and uneven extrusion. It comes with high precision ball bearing wheels offering high stiffness, superb dimensional stability, and low friction. The ball bearing wheel can do all these because it is made from Delrin/POM engineering thermoplastic.
Ender 3 weighs 15.4 pounds, and it has a high-powered, safe power supply. This model comes with two different fuses, which ensure that your printer doesn’t get damaged due to a power surge. Therefore, if you need a printer that will serve you well and that's protected against power surges, Ender 3 is the right one for you.
Its kit is partially-assembled. Hence, the full assembling of this model is easier and requires no extraordinary technicality. It has all the tools needed for a complete installation; it is, therefore, what you can do yourself.

What I Like About This Model

  • It is affordable
  • Protected against power surge
  • Easy assembling
  • Works with microSD
  • Silent during operation

What I Don’t Like About This Model 

  • Although it has great size, the bed still doesn’t allow for full chest, or thigh prints

Check Prices on Amazon


3. Formbot Raptor

Formbot Raptor

Check Prices

Formbot Raptor is a beautiful printer for printing iron man armor. It comes with BL Touch that makes automatic calibration easier. It also has a filament sensor whose job is to detect the level of your filament. If your printer is out of filament, the sensor will notify you and stop operation immediately to avoid having a low precision iron man armor 3D printing. This model weighs 23.5kg and comes with a large build size.
If what you need is a printer that can process high-temperature materials, Formbot Raptor is the right choice for you. It can extrude plastic filaments up to a temperature of 350°C. The SSR of this printer is well protected. The job of the SSR is to drive the heat bed. In a situation where the cover of the SSR falls off, live contacts will be exposed. This will not only affect your printing iron man armor; it is also dangerous for the user. However, if you opt for Formbot Raptor, you don’t have to bother about the case falling off because it is well enclosed.
Formbot Raptor has 400x400x700mm Filament Sensor High-temp and 400x400x500mm Build Size. Overall, two significant factors make this model stand out from several other 3D printer — it is easy to assemble and easy to operate. You only need 10 to 15 minutes to assemble Formbot Raptor fully. Operating this model also doesn’t require many technicalities.
It features sturdy construction, a ball screw, and a linear guide, plus a brand name power supply unit.

What I Like About This Model 

  • It is durable
  • Easy to assemble
  • It is easy to operate
  • Automatic calibration is easier
  • Comes with a filament sensor
  • It can process high-temperature materials

What I Don’t Like About This Model 

  • The filament sensor doesn’t always work and can cause the machine to always be in error mode

Check Prices


4. Anycubic Chiron

Anycubic Chiron

Check Prices on Amazon

Do you need a printer for iron man armor that can print larger objects? If your answer is in the affirmative, then this is for you. Anycubic Chiron is a beautiful 3D printer with a maximum print size of 15.75 x 15.75 x 17.72 inches. It is also not restricted to using a single filament. Instead, it uses multiple filaments such as wood, PLA, ABS, HIPS, TPU, etc. You can, therefore, choose any one of your choices depending on the kind of iron man armor 3D printing design you want.
This printer has a semi-auto leveling feature and comes with TFT touch screen, making operation smarter and easier. It features filament detection, which notifies you when your machine runs out of filament. Its power loss resume feature helps to keep your work intact whenever there’s a power outage. The printing resumes automatically from where it stopped when power is restored. If you have ever lost an iron man armor 3D printing to a power outage after spending about 10 hours on the project, you’ll understand the relevance of the power loss resume feature. When you use Anycubic Chiron for your 3D printing, you don’t have to be worried about losing your work to a power outage.
The modular design of this model allows for easy assembling, and you can start printing immediately. It is also one of the best printers for beginners due to its easy to assemble and use feature. Anycubic Chiron has a full metal body; therefore, it is more stable and durable than most 3D printers you know. It is user friendly, and you can see the printing process on the screen. If you also need a printer for offline design, this will be perfect for you. Its high-grade titan extruder also provides you with an excellent printing experience of flexibility.

What I Like About This Model 

  • It can print larger objects
  • Supports multiple filaments
  • Faster and easier operation
  • Has filament detection
  • It has a power loss resume feature
  • It is durable
  • Supports offline design

What I Don’t Like About This Model 

  • The machine can randomly give an error, sometimes without warning.

Check Prices on Amazon


5. Peopoly Phenom XXL

Peopoly Phenom XXL

Check Prices

In case you are interested in purchasing the latest and the largest 3D printer made by Peopoly, Phenom XXL is the right choice for you. It is an incredible printer featuring 22 times the build volume of a Formlabs Form 3.
This model has a print volume of 527 × 296 x 550 mm, and a resolution is 137 micrometers. It has MSLA 3D printing technology. Phenom XXL is about four times bigger than Form 3L and 500% bigger than phenom. It comes with an industrial-grade 4K panel and is specifically made for people who need a printer that can produce high volume production and extra-large models. With this model, you can print large models with splitting without stress.
It also comes with a modern, perforated build plate. Such plates help to effectively create anchor points that keep the print firm and ensure stability throughout the process. Phenom XXL, therefore, has a good print precision.
The LCD panel of this printer has a resolution of 3840 x 2160 pixels. Operating Phenom XXL is no different from the previous Phenom machines. It uses ChiTu firmware, with model preparation handled in ChiTuBox software. This kind of firmware is easy to use, and it works with a desktop. Therefore, with Phenom XXL, you can print directly from your desktop.

What I Like About This Model 

What I Don’t Like About This Model 

  • It is heavy and can’t be easily moved around
  • It’s EXTREMELY expensive

Check Prices


THE VERDICT

There are several printers for iron man armor that you can purchase. However, with such multiple options comes a daunting challenge. You might see a specific 3D printer and think it is what you need, just to realize later that you’ve invested in a printer lacking the essential features you require. Peopoly Phenom XXL is a beautiful printer, perfect for anyone who desires to make larger prints. However, if you only need small prints, it’ll be better to opt for a printer like Creality Ender 3. Personally, the best overall is the CR10S4. 

CONCLUSION

After reading through the information above, you should be equipped with the knowledge to choose the right 3D printer for iron man armor. Nevertheless, if you’re still unsure about what you want, you may want to go back and study the features of each printer provided together with their pros and cons. Relate those features with your expectations. If you do, you should find the right printer you need.

Previous article How to recycle PLA

Leave a comment

* Required fields

Hello
Join us as seller