-80%

Compressor vise press compactor 3D print STL File

$5.00 $1.00

In StockIn StockOut of stock
The 'compressor vise press compactor' is a device I've designed to compress an flatten objects to be used for other purposes.


I recommend printing with a 100% infill for increase durability to prevent braking from the stress of compacting objects & powders.


Can be used to compress & flatten; Paper mache, clay, powders, dried an ground fruits/vegetables, herbs, sand, snow Etc.


This file is scaled at a smaller size so it is able to print on smaller printers easier but can easily be sized up in the slicer setting by just up scaling the full design equally.


~{Constructing The Device}~
First take the base plate an screw the two bolts in half way with the top of the bolt on the bottom of the plate. Place the chamber on the center of the base with the bolts on either side, the bolts should be screwed in to just reach the same hight as the chamber. Place the slider in the chamber then place the top plate on top of the chamber with the side holes aligning with the side bolts. Screw the side bolts into the top plate with the chamber an slider sandwiched in between snug but can still be slid out. Screw the driver star bolt into the center hole on the top plate an the device is complete. 


*Using Device*
Unscrew the driver star bolt slide out the chamber & slider, load your material of choice on to the flat side of the slider in side the chamber. Slide back in the press with the indent of the slider facing up towards the star driver bolt. Then turn the driver bolt to compact the substance.


*Object sizes;
Top plate (L 56mm, W 28mm, H 6mm)
Driver star bolt(L 37.76mm, W 37.34mm, H 30mm)
Slider (L 22mm, W 22mm, H 6mm)
Chamber (L 28mm, W 28mm, H 12mm)
Side bolts (L 13.50mm, W 13.25mm, H 30mm)
Base plate (L 56mm, W 28mm, H 6mm)
Out of stock

SKU: N/ACategories: all, BestsellerTags: Art, Bolts, Compress, Food, Press, Science, STL, Tool, Tools, Vise
The 'compressor vise press compactor' is a device I've designed to compress an flatten objects to be used for other purposes.


I recommend printing with a 100% infill for increase durability to prevent braking from the stress of compacting objects & powders.


Can be used to compress & flatten; Paper mache, clay, powders, dried an ground fruits/vegetables, herbs, sand, snow Etc.


This file is scaled at a smaller size so it is able to print on smaller printers easier but can easily be sized up in the slicer setting by just up scaling the full design equally.


~{Constructing The Device}~
First take the base plate an screw the two bolts in half way with the top of the bolt on the bottom of the plate. Place the chamber on the center of the base with the bolts on either side, the bolts should be screwed in to just reach the same hight as the chamber. Place the slider in the chamber then place the top plate on top of the chamber with the side holes aligning with the side bolts. Screw the side bolts into the top plate with the chamber an slider sandwiched in between snug but can still be slid out. Screw the driver star bolt into the center hole on the top plate an the device is complete. 


*Using Device*
Unscrew the driver star bolt slide out the chamber & slider, load your material of choice on to the flat side of the slider in side the chamber. Slide back in the press with the indent of the slider facing up towards the star driver bolt. Then turn the driver bolt to compact the substance.


*Object sizes;
Top plate (L 56mm, W 28mm, H 6mm)
Driver star bolt(L 37.76mm, W 37.34mm, H 30mm)
Slider (L 22mm, W 22mm, H 6mm)
Chamber (L 28mm, W 28mm, H 12mm)
Side bolts (L 13.50mm, W 13.25mm, H 30mm)
Base plate (L 56mm, W 28mm, H 6mm)
Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist

Compressor vise press compactor 3D print STL File

$5.00 $1.00