Mandalorian Gauntlets 3D STL File Printable Model

$26.00

In StockIn StockOut of stock
Our Mandalorian Gauntlets include a unique hinge system, rocket dart, whipcord and more! Can be printed on small format printers, or a resin printer as well.
 
FEATURES:
 
- Built In Hinge System (easy on/off without help!)
- Rocket Dart Gun (left gauntlet)
- Port for brass hose connector (left gauntlet, brass hose connector not included in digital file.)
- Attenuator (left gauntlet)
- Emitter (left gauntlet)
- Heat Sink (left gauntlet)
- Button Panel (left gauntlet)
- Power Coupler with rear hole inset for hose connector (right gauntlet, hose connector not included in digital file.)
- Whipcord with rear hole inset for hose connector (right gauntlet)
- Darts designed to be reinforced with steel rods and seated in brass tubing (right gauntlet, steel rods and brass tubing not included in digital file..)
- Control Knobs (right gauntlet)
 
SIZE: Left Gauntlet 248mm overall exterior length; approximately 77mm wide x 63mm high front opening; approximately 100mm wide x 100mm high rear opening. Right Gauntlet 231mm overall length;  approximately 77mm wide x 63mm high front opening; approximately 100mm wide x 100mm high rear opening; 120mm high exterior profile.
 
Lengths are different due to button panel on Left Gauntlet.

LAST MODEL UPDATE 10/7/2021 - Please re-download your files to get the new improvements. Better fit, improved hinges & accessories.

QUALITY CHECKED IN SIMPLIFY 3D AND TEST PRINTED: We print all the parts in our 3D MODEL FILES (STL's) to ensure you get a quality 3D Printable Model File and a functional part! In most cases, the DIY 3D Model Files that we sell are the VERY SAME FILES WE USE TO MAKE THE PHYSICAL ITEM.

3D PRINTING THE M1 MANDO GAUNTLET SET:

The Gauntlets are designed to be printed in 2 pieces and assembled with the additional hardware noted below. The Gauntlets can be printed one at a time on a small 3D Printer, such as an Ender 3 (220x220x250mm), or print both on a large format printer (300x300x400mm).  

ADDITIONAL HARDWARE REQUIRED: You will need the following hardware (or similar) to complete the gauntlets build:

9x M3 x .05 x 12mm screws
9x 3mm washers
2x 2mm x 300mm stainless steel rods. (Gauntlet hinges)
4x 1mm x 50mm stainless steel rod (internal support for darts)

HARDWARE LIST: tiny.cc/diy-supplies


ADDITIONAL INFORMATION:

Included with the 3D Printable Model File is a detailed printing and assembly document that should explain everything clearly. However, if there's anything you're not certain about please feel free to contact us. We want you to be happy with your purchase, and will do whatever possible on our end to ensure you get a successful print!

Some cleanup, sanding or filing may be required to get everything to fit properly. We've tested the tolerances and they do work, but if you run into difficulty, or have questions, please contact us. We're happy to help, and in an extreme case where something is just not working, I will provide revised files at no cost to you.

PLEASE TAG US ON SOCIAL MEDIA SO WE CAN SEE IT IN THE WILD! And we'd be ever so grateful if you'd credit us with the 3D Model File used for your cosplay creation - @makerbak3d on Instagram or Facebook. Thank you!

TERMS OF USE: This model and design was created by HK7335 in Blender 3D. It is 100% an original model owned by MakerBak3D and Designer HK7335.

FOR INDIVIDUAL PERSONAL USE ONLY. PLEASE DO NOT SHARE OR DISTRIBUTE FILES.

NOT FOR USE IN ANY COMMERCIAL ASPECT! DO NOT DUPLICATE, CAST, MASS PRODUCE, OR SELL THE FILE OR THE PHYSICAL OBJECT FOR PROFIT.

THIS IS THE WAY.

This is not an official licensed product and is only considered fan art protected under the fair-use act.

Not associated with LUCASFILM LTD. ™ or any LFL Ltd. ™ Film or Franchise. "Star Wars" is a registered trademark of LucasFilm Ltd. The Star Wars logo, characters, prop designs and names © LucasFilm Ltd. This document and related sites/products is not sponsored or endorsed by LucasFilm Ltd. or any of its affiliates. All © and ™ are property of their respected owners and are used here for comparative or descriptive purposes only.

Title: Mandalorian Gauntlets 3D STL File Printable Model

  • Mandalorian Gauntlets 3D STL File Printable Model
Out of stock

Our Mandalorian Gauntlets include a unique hinge system, rocket dart, whipcord and more! Can be printed on small format printers, or a resin printer as well.
 
FEATURES:
 
- Built In Hinge System (easy on/off without help!)
- Rocket Dart Gun (left gauntlet)
- Port for brass hose connector (left gauntlet, brass hose connector not included in digital file.)
- Attenuator (left gauntlet)
- Emitter (left gauntlet)
- Heat Sink (left gauntlet)
- Button Panel (left gauntlet)
- Power Coupler with rear hole inset for hose connector (right gauntlet, hose connector not included in digital file.)
- Whipcord with rear hole inset for hose connector (right gauntlet)
- Darts designed to be reinforced with steel rods and seated in brass tubing (right gauntlet, steel rods and brass tubing not included in digital file..)
- Control Knobs (right gauntlet)
 
SIZE: Left Gauntlet 248mm overall exterior length; approximately 77mm wide x 63mm high front opening; approximately 100mm wide x 100mm high rear opening. Right Gauntlet 231mm overall length;  approximately 77mm wide x 63mm high front opening; approximately 100mm wide x 100mm high rear opening; 120mm high exterior profile.
 
Lengths are different due to button panel on Left Gauntlet.

LAST MODEL UPDATE 10/7/2021 - Please re-download your files to get the new improvements. Better fit, improved hinges & accessories.

QUALITY CHECKED IN SIMPLIFY 3D AND TEST PRINTED: We print all the parts in our 3D MODEL FILES (STL's) to ensure you get a quality 3D Printable Model File and a functional part! In most cases, the DIY 3D Model Files that we sell are the VERY SAME FILES WE USE TO MAKE THE PHYSICAL ITEM.

3D PRINTING THE M1 MANDO GAUNTLET SET:

The Gauntlets are designed to be printed in 2 pieces and assembled with the additional hardware noted below. The Gauntlets can be printed one at a time on a small 3D Printer, such as an Ender 3 (220x220x250mm), or print both on a large format printer (300x300x400mm).  

ADDITIONAL HARDWARE REQUIRED: You will need the following hardware (or similar) to complete the gauntlets build:

9x M3 x .05 x 12mm screws
9x 3mm washers
2x 2mm x 300mm stainless steel rods. (Gauntlet hinges)
4x 1mm x 50mm stainless steel rod (internal support for darts)

HARDWARE LIST: tiny.cc/diy-supplies


ADDITIONAL INFORMATION:

Included with the 3D Printable Model File is a detailed printing and assembly document that should explain everything clearly. However, if there's anything you're not certain about please feel free to contact us. We want you to be happy with your purchase, and will do whatever possible on our end to ensure you get a successful print!

Some cleanup, sanding or filing may be required to get everything to fit properly. We've tested the tolerances and they do work, but if you run into difficulty, or have questions, please contact us. We're happy to help, and in an extreme case where something is just not working, I will provide revised files at no cost to you.

PLEASE TAG US ON SOCIAL MEDIA SO WE CAN SEE IT IN THE WILD! And we'd be ever so grateful if you'd credit us with the 3D Model File used for your cosplay creation - @makerbak3d on Instagram or Facebook. Thank you!

TERMS OF USE: This model and design was created by HK7335 in Blender 3D. It is 100% an original model owned by MakerBak3D and Designer HK7335.

FOR INDIVIDUAL PERSONAL USE ONLY. PLEASE DO NOT SHARE OR DISTRIBUTE FILES.

NOT FOR USE IN ANY COMMERCIAL ASPECT! DO NOT DUPLICATE, CAST, MASS PRODUCE, OR SELL THE FILE OR THE PHYSICAL OBJECT FOR PROFIT.

THIS IS THE WAY.

This is not an official licensed product and is only considered fan art protected under the fair-use act.

Not associated with LUCASFILM LTD. ™ or any LFL Ltd. ™ Film or Franchise. "Star Wars" is a registered trademark of LucasFilm Ltd. The Star Wars logo, characters, prop designs and names © LucasFilm Ltd. This document and related sites/products is not sponsored or endorsed by LucasFilm Ltd. or any of its affiliates. All © and ™ are property of their respected owners and are used here for comparative or descriptive purposes only.

Title

Mandalorian Gauntlets 3D STL File Printable Model

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist

Mandalorian Gauntlets 3D STL File Printable Model

$26.00