STL Files for Raya's Sword from the new Disney Animated Movie Raya and the Last Dragon
After I saw the trailler, I knew I had to make this sword.
So I did and wanted to share it with you.
Usually all my models are free, but this one took quite a while to make so I'm charging a small fee, and all resourses made from this will be directed to making more awesome stuff for you!
I hope you enjoy my work and I hope it brings a smile to you and everyone you share it with!
I made a video making it, and here is the link:
Don't forget to like and subscribe! ?
If you make it, post and tag me on instagram so I can see and give you a like!
The Sword is roughly 1120mm (or 44") long, 212mm (or 8,33") wide and 41mm (or 1.6") thick
I've added a file with pieces sliced for small 3D printers such as the Prusa Mini, Cetus 3D or other smaller printers (down to 180x180x180mm Print Area)
Note that the files from this smaller pieces may not fit with original sized files
I've added 2 types of wall mount so you can display this beautiful sword in your home! There is 2 types so you can choose the best one the fits your needs. On the First, the blade faces downwards and the Second tha Blade faces upwards.
3D PRINTING SETTINGS
As this is not a small file, you can print as detailed as you want.
I printed the Handle with 0.16mm
The guard I used adaptive layers from 0.32 to 0.08mm
The blade I used 0.2mm
And the Gemstone I used a Resin Printer, if you use a FDM printer, I would use as small layers as I can print, in my case 0.08mm
The Blade parts is divided in sections. It may seams upside down, but its not.
Please use support touching the build plate only!
The handle, if you use simplify3d, use custom supports only on the bottom part.
If you use Cura, when you slice, it will create supports on the middle of the part, this supports are not necessary.
My solution was to create a support blocker over the whole model except the bottom part where it's hanging.